ePMP Elevate: 10 Subscriber License
Cambium ePMP™Elevate : 10 Subscriber License
Elevate your network to the next level of performance, scalability, and stability. ePMP Elevate solves the network migration challenge by enabling you to convert existing deployed non-Cambium 802.11n-based fixed outdoor wireless broadband subscriber modules to ePMP Elevate subscribers, gaining all the benefits of ePMP without the cost of hardware replacements at subscriber sites. The first hardware agnostic network solution, ePMP Elevate solves a real challenge for network operators worldwide for a very attractive solution cost.
Specifications C050900S510A
# of Licenses | 10 Subscriber Licenses |
Channel Spacing | Configurable on 5 MHz increments |
Frequency Range | 5150 - 5970 MHz (exact frequencies as allowed by local regulations and underlying hardware) |
Channel Width | 5 | 10 | 20 | 40 MHz |
MAC (Media Access Control) Layer | Cambium Proprietary and optionally standard 802.11n |
Protocols Used | IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping, LLDP, DHCP, RADIUS, NTP |
Network Management | HTTPs, SNMPv2c, SSH, Cambium Networks cnMaestro |
VLAN | 802.1Q with 802.1p priority |
Supported ePMP Access Points | ePMP 2000 & ePMP 1000 5 GHz |
Subscribers per Sector | Up to 120 |
ARQ | Yes |
Modulation Levels (Adaptive) | MCS0 (BPSK) to MCS15 (64QAM) 5/6) |
GPS Synchronization | Yes, via Internal GPS or CMM4 with 56V and 5 pin to 7 pin cross over cable adapter |
Quality of Service | Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority |
Encryption | 128 bit AES (CCMP mode) |