• Home
  • B24 - 24 GHz, 33 dBi, 1.5Gbps capable PTP backhaul with GPS

B24 - 24 GHz, 33 dBi, 1.5Gbps capable PTP backhaul with GPS

(0) No Reviews yet
SKU: 100-00074
Manufacturer: Mimosa Networks

Mimosa B24

Reliable Unlicensed Gigabit Performance B24 Backhaul

Breaking through the barriers of price, size, and power requirements, the B24 delivers up to 1.5 Gbps of aggregate speed in the less crowded and unlicensed 24 GHz frequency band. By dynamically adjusting bandwidth based on upstream and downstream demand, the B24 efficiently delivers the most usable bandwidth possible with 1 ms low-latency, to meet modern internet traffic needs.

Lightweight, Low Power

At a fraction of the weight, size, and power of alternative solutions, the B24 is incredibly easy to install and fits into any setting. At 6 lbs and consuming 19.5 W, the B24 is great for battery backup installations.

Fiber Ready

For flexibility, redundant ethernet and fiber connections are supported, a feature that was previously only available in stratospherically priced outdoor products.

GPS Sync for Collocation

Like other Mimosa products, GPS synchronization allows collocated B24 radios to share the same channel, permitting up to eight links to operate on the same rooftop, each running at 1.5 Gbps.

Reliable Shorthaul

With superior reliability compared to the congested 5 GHz band, the B24 goes the distance even in the rain with reliable links up to 3 km (2 mi), and reaching farther than other 60/70/80 GHz alternatives.


  • Fixed Wireless Broadband Backhaul
  • Business and MDU Rooftop Connections
  • Campus Building Interconnecting
  • Video Surveillance and WiFi Hotspot Distribution
  • Smart City Connectivity

Specifications B24

Gigabit Ethernet10/100/1000-BASE-T
Fiber CapableSupports SFP+ interface for fiber operation
Ethernet RedundancyDual Link failover; Does not support simultaneous ethernet + fiber operation
Security128-bit AES PSK with hardware acceleration
QoSSupports 4 pre-configured QoS levels
Max ThroughputUp to 1.5 Gbps IP aggregate UL/DL
Max PHY rate1.7 Gbps PHY
Low Latency<1 ms
MIMO and Modulation4x4:4 MIMO OFDM up to 256 QAM
BandwidthSingle or dual channel; 20/40/80 MHz channel width
Channel SpacingSingle channel allows 5 MHz channel spacing; Dual channel allows separate, no-overlapping 5 MHz spacing increments
Frequency Range24.05 - 24.25 GHz worldwide support; Operating range is 24.07 - 24.23 GHz
EIRP~20 dBm (CE) ~33 dBm (FCC/IC) ~37 dBm (other regions)
Min Output Power-20 dBm
Power Increment Level1 dB
Sensitivity (MCS0)-84 dBm @ 80 MHz -87 dBm @ 40 MHz -90 dBm @ 20 MHz
Gain33 dBi
Beamwidth (3dB)3.0º
Elevation Adjust+-2.5º azimuth mechanical adjust+-15º elevation mechanical adjust
Front to Back Ratio>30 dB
Cross-Polar Isolation>20 dB
PolarizationDual-linear (slant 45º)
Max Power Consumption19.5 W
System Power Method48V DC 802.3at compliant
System Lightning & ESD Protection6 kV
PoE Power SupplyPassive POE compliant, 50V 1.2A power over ethernet (included)
Outdoor Ingress Protection RatingIP67
Operating Temperature-40°C to +55°C (-40°F to 131°F)
Operating Humidity5 to 100% condensing
Operating Altitude4,420 m (14,500’) max
Shock & VibrationETS 300-019-2-4 class 4M5
Regulatory and Compliance
ApprovalsFCC 15.249 IC RSS210 ETSI EN 300-440 V2.1.1 CE
RoHS ComplianceYes; WEEE
SafetyEC/EN/ 60950-1
DimensionsHeight: 260 mm (10.24”)
Width260 mm (10.24”) Depth: 134 mm (5.3”) without bracket; 252 mm (9.9”) with bracket Weight: 2.76 kg (6 lbs) including mount
Enclosure CharacteristicsOutdoor UV stabilized plastic; Powder-coated, aluminum mounting panel
Wind Survivability200 km/h (125 mph)
Wind Loading12.52 kg @ 160 km/h (27.61 lbs @ 100 mph)
MountingPrecision lightweight aiming pole mount with +-15º elevation and +-2.5º horizontal adjustment screws
Network InterfacesGigabit ethernet (RJ45) and gigabit fiber (SFP cage); Operation modes: Hot standby

Ratings & Reviews

No reviews available

Be the first to Write a Review